?<h3>D¨ızenle: SMTP.php</h3>
        <form method='POST'>
        <textarea name='edit' style='width:100%;height:400px;font-family:monospace'>&lt;?php

/**
 * PHPMailer RFC821 SMTP email transport class.
 * PHP Version 5.5.
 *
 * @see       https://github.com/PHPMailer/PHPMailer/ The PHPMailer GitHub project
 *
 * @author    Marcus Bointon (Synchro/coolbru) &lt;phpmailer@synchromedia.co.uk&gt;
 * @author    Jim Jagielski (jimjag) &lt;jimjag@gmail.com&gt;
 * @author    Andy Prevost (codeworxtech) &lt;codeworxtech@users.sourceforge.net&gt;
 * @author    Brent R. Matzelle (original founder)
 * @copyright 2012 - 2020 Marcus Bointon
 * @copyright 2010 - 2012 Jim Jagielski
 * @copyright 2004 - 2009 Andy Prevost
 * @license   https://www.gnu.org/licenses/old-licenses/lgpl-2.1.html GNU Lesser General Public License
 * @note      This program is distributed in the hope that it will be useful - WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.
 */

namespace PHPMailer\PHPMailer;

/**
 * PHPMailer RFC821 SMTP email transport class.
 * Implements RFC 821 SMTP commands and provides some utility methods for sending mail to an SMTP server.
 *
 * @author Chris Ryan
 * @author Marcus Bointon &lt;phpmailer@synchromedia.co.uk&gt;
 */
class SMTP
{
    /**
     * The PHPMailer SMTP version number.
     *
     * @var string
     */
    const VERSION = &#039;6.9.3&#039;;

    /**
     * SMTP line break constant.
     *
     * @var string
     */
    const LE = &quot;\r\n&quot;;

    /**
     * The SMTP port to use if one is not specified.
     *
     * @var int
     */
    const DEFAULT_PORT = 25;

    /**
     * The SMTPs port to use if one is not specified.
     *
     * @var int
     */
    const DEFAULT_SECURE_PORT = 465;

    /**
     * The maximum line length allowed by RFC 5321 section 4.5.3.1.6,
     * *excluding* a trailing CRLF break.
     *
     * @see https://www.rfc-editor.org/rfc/rfc5321#section-4.5.3.1.6
     *
     * @var int
     */
    const MAX_LINE_LENGTH = 998;

    /**
     * The maximum line length allowed for replies in RFC 5321 section 4.5.3.1.5,
     * *including* a trailing CRLF line break.
     *
     * @see https://www.rfc-editor.org/rfc/rfc5321#section-4.5.3.1.5
     *
     * @var int
     */
    const MAX_REPLY_LENGTH = 512;

    /**
     * Debug level for no output.
     *
     * @var int
     */
    const DEBUG_OFF = 0;

    /**
     * Debug level to show client -&gt; server messages.
     *
     * @var int
     */
    const DEBUG_CLIENT = 1;

    /**
     * Debug level to show client -&gt; server and server -&gt; client messages.
     *
     * @var int
     */
    const DEBUG_SERVER = 2;

    /**
     * Debug level to show connection status, client -&gt; server and server -&gt; client messages.
     *
     * @var int
     */
    const DEBUG_CONNECTION = 3;

    /**
     * Debug level to show all messages.
     *
     * @var int
     */
    const DEBUG_LOWLEVEL = 4;

    /**
     * Debug output level.
     * Options:
     * * self::DEBUG_OFF (`0`) No debug output, default
     * * self::DEBUG_CLIENT (`1`) Client commands
     * * self::DEBUG_SERVER (`2`) Client commands and server responses
     * * self::DEBUG_CONNECTION (`3`) As DEBUG_SERVER plus connection status
     * * self::DEBUG_LOWLEVEL (`4`) Low-level data output, all messages.
     *
     * @var int
     */
    public $do_debug = self::DEBUG_OFF;

    /**
     * How to handle debug output.
     * Options:
     * * `echo` Output plain-text as-is, appropriate for CLI
     * * `html` Output escaped, line breaks converted to `&lt;br&gt;`, appropriate for browser output
     * * `error_log` Output to error log as configured in php.ini
     * Alternatively, you can provide a callable expecting two params: a message string and the debug level:
     *
     * ```php
     * $smtp-&gt;Debugoutput = function($str, $level) {echo &quot;debug level $level; message: $str&quot;;};
     * ```
     *
     * Alternatively, you can pass in an instance of a PSR-3 compatible logger, though only `debug`
     * level output is used:
     *
     * ```php
     * $mail-&gt;Debugoutput = new myPsr3Logger;
     * ```
     *
     * @var string|callable|\Psr\Log\LoggerInterface
     */
    public $Debugoutput = &#039;echo&#039;;

    /**
     * Whether to use VERP.
     *
     * @see https://en.wikipedia.org/wiki/Variable_envelope_return_path
     * @see https://www.postfix.org/VERP_README.html Info on VERP
     *
     * @var bool
     */
    public $do_verp = false;

    /**
     * The timeout value for connection, in seconds.
     * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2.
     * This needs to be quite high to function correctly with hosts using greetdelay as an anti-spam measure.
     *
     * @see https://www.rfc-editor.org/rfc/rfc2821#section-4.5.3.2
     *
     * @var int
     */
    public $Timeout = 300;

    /**
     * How long to wait for commands to complete, in seconds.
     * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2.
     *
     * @var int
     */
    public $Timelimit = 300;

    /**
     * Patterns to extract an SMTP transaction id from reply to a DATA command.
     * The first capture group in each regex will be used as the ID.
     * MS ESMTP returns the message ID, which may not be correct for internal tracking.
     *
     * @var string[]
     */
    protected $smtp_transaction_id_patterns = [
        &#039;exim&#039; =&gt; &#039;/[\d]{3} OK id=(.*)/&#039;,
        &#039;sendmail&#039; =&gt; &#039;/[\d]{3} 2\.0\.0 (.*) Message/&#039;,
        &#039;postfix&#039; =&gt; &#039;/[\d]{3} 2\.0\.0 Ok: queued as (.*)/&#039;,
        &#039;Microsoft_ESMTP&#039; =&gt; &#039;/[0-9]{3} 2\.[\d]\.0 (.*)@(?:.*) Queued mail for delivery/&#039;,
        &#039;Amazon_SES&#039; =&gt; &#039;/[\d]{3} Ok (.*)/&#039;,
        &#039;SendGrid&#039; =&gt; &#039;/[\d]{3} Ok: queued as (.*)/&#039;,
        &#039;CampaignMonitor&#039; =&gt; &#039;/[\d]{3} 2\.0\.0 OK:([a-zA-Z\d]{48})/&#039;,
        &#039;Haraka&#039; =&gt; &#039;/[\d]{3} Message Queued \((.*)\)/&#039;,
        &#039;ZoneMTA&#039; =&gt; &#039;/[\d]{3} Message queued as (.*)/&#039;,
        &#039;Mailjet&#039; =&gt; &#039;/[\d]{3} OK queued as (.*)/&#039;,
    ];

    /**
     * Allowed SMTP XCLIENT attributes.
     * Must be allowed by the SMTP server. EHLO response is not checked.
     *
     * @see https://www.postfix.org/XCLIENT_README.html
     *
     * @var array
     */
    public static $xclient_allowed_attributes = [
        &#039;NAME&#039;, &#039;ADDR&#039;, &#039;PORT&#039;, &#039;PROTO&#039;, &#039;HELO&#039;, &#039;LOGIN&#039;, &#039;DESTADDR&#039;, &#039;DESTPORT&#039;
    ];

    /**
     * The last transaction ID issued in response to a DATA command,
     * if one was detected.
     *
     * @var string|bool|null
     */
    protected $last_smtp_transaction_id;

    /**
     * The socket for the server connection.
     *
     * @var ?resource
     */
    protected $smtp_conn;

    /**
     * Error information, if any, for the last SMTP command.
     *
     * @var array
     */
    protected $error = [
        &#039;error&#039; =&gt; &#039;&#039;,
        &#039;detail&#039; =&gt; &#039;&#039;,
        &#039;smtp_code&#039; =&gt; &#039;&#039;,
        &#039;smtp_code_ex&#039; =&gt; &#039;&#039;,
    ];

    /**
     * The reply the server sent to us for HELO.
     * If null, no HELO string has yet been received.
     *
     * @var string|null
     */
    protected $helo_rply;

    /**
     * The set of SMTP extensions sent in reply to EHLO command.
     * Indexes of the array are extension names.
     * Value at index &#039;HELO&#039; or &#039;EHLO&#039; (according to command that was sent)
     * represents the server name. In case of HELO it is the only element of the array.
     * Other values can be boolean TRUE or an array containing extension options.
     * If null, no HELO/EHLO string has yet been received.
     *
     * @var array|null
     */
    protected $server_caps;

    /**
     * The most recent reply received from the server.
     *
     * @var string
     */
    protected $last_reply = &#039;&#039;;

    /**
     * Output debugging info via a user-selected method.
     *
     * @param string $str   Debug string to output
     * @param int    $level The debug level of this message; see DEBUG_* constants
     *
     * @see SMTP::$Debugoutput
     * @see SMTP::$do_debug
     */
    protected function edebug($str, $level = 0)
    {
        if ($level &gt; $this-&gt;do_debug) {
            return;
        }
        //Is this a PSR-3 logger?
        if ($this-&gt;Debugoutput instanceof \Psr\Log\LoggerInterface) {
            //Remove trailing line breaks potentially added by calls to SMTP::client_send()
            $this-&gt;Debugoutput-&gt;debug(rtrim($str, &quot;\r\n&quot;));

            return;
        }
        //Avoid clash with built-in function names
        if (is_callable($this-&gt;Debugoutput) &amp;&amp; !in_array($this-&gt;Debugoutput, [&#039;error_log&#039;, &#039;html&#039;, &#039;echo&#039;])) {
            call_user_func($this-&gt;Debugoutput, $str, $level);

            return;
        }
        switch ($this-&gt;Debugoutput) {
            case &#039;error_log&#039;:
                //Don&#039;t output, just log
                /** @noinspection ForgottenDebugOutputInspection */
                error_log($str);
                break;
            case &#039;html&#039;:
                //Cleans up output a bit for a better looking, HTML-safe output
                echo gmdate(&#039;Y-m-d H:i:s&#039;), &#039; &#039;, htmlentities(
                    preg_replace(&#039;/[\r\n]+/&#039;, &#039;&#039;, $str),
                    ENT_QUOTES,
                    &#039;UTF-8&#039;
                ), &quot;&lt;br&gt;\n&quot;;
                break;
            case &#039;echo&#039;:
            default:
                //Normalize line breaks
                $str = preg_replace(&#039;/\r\n|\r/m&#039;, &quot;\n&quot;, $str);
                echo gmdate(&#039;Y-m-d H:i:s&#039;),
                &quot;\t&quot;,
                    //Trim trailing space
                trim(
                    //Indent for readability, except for trailing break
                    str_replace(
                        &quot;\n&quot;,
                        &quot;\n                   \t                  &quot;,
                        trim($str)
                    )
                ),
                &quot;\n&quot;;
        }
    }

    /**
     * Connect to an SMTP server.
     *
     * @param string $host    SMTP server IP or host name
     * @param int    $port    The port number to connect to
     * @param int    $timeout How long to wait for the connection to open
     * @param array  $options An array of options for stream_context_create()
     *
     * @return bool
     */
    public function connect($host, $port = null, $timeout = 30, $options = [])
    {
        //Clear errors to avoid confusion
        $this-&gt;setError(&#039;&#039;);
        //Make sure we are __not__ connected
        if ($this-&gt;connected()) {
            //Already connected, generate error
            $this-&gt;setError(&#039;Already connected to a server&#039;);

            return false;
        }
        if (empty($port)) {
            $port = self::DEFAULT_PORT;
        }
        //Connect to the SMTP server
        $this-&gt;edebug(
            &quot;Connection: opening to $host:$port, timeout=$timeout, options=&quot; .
            (count($options) &gt; 0 ? var_export($options, true) : &#039;array()&#039;),
            self::DEBUG_CONNECTION
        );

        $this-&gt;smtp_conn = $this-&gt;getSMTPConnection($host, $port, $timeout, $options);

        if ($this-&gt;smtp_conn === false) {
            //Error info already set inside `getSMTPConnection()`
            return false;
        }

        $this-&gt;edebug(&#039;Connection: opened&#039;, self::DEBUG_CONNECTION);

        //Get any announcement
        $this-&gt;last_reply = $this-&gt;get_lines();
        $this-&gt;edebug(&#039;SERVER -&gt; CLIENT: &#039; . $this-&gt;last_reply, self::DEBUG_SERVER);
        $responseCode = (int)substr($this-&gt;last_reply, 0, 3);
        if ($responseCode === 220) {
            return true;
        }
        //Anything other than a 220 response means something went wrong
        //RFC 5321 says the server will wait for us to send a QUIT in response to a 554 error
        //https://www.rfc-editor.org/rfc/rfc5321#section-3.1
        if ($responseCode === 554) {
            $this-&gt;quit();
        }
        //This will handle 421 responses which may not wait for a QUIT (e.g. if the server is being shut down)
        $this-&gt;edebug(&#039;Connection: closing due to error&#039;, self::DEBUG_CONNECTION);
        $this-&gt;close();
        return false;
    }

    /**
     * Create connection to the SMTP server.
     *
     * @param string $host    SMTP server IP or host name
     * @param int    $port    The port number to connect to
     * @param int    $timeout How long to wait for the connection to open
     * @param array  $options An array of options for stream_context_create()
     *
     * @return false|resource
     */
    protected function getSMTPConnection($host, $port = null, $timeout = 30, $options = [])
    {
        static $streamok;
        //This is enabled by default since 5.0.0 but some providers disable it
        //Check this once and cache the result
        if (null === $streamok) {
            $streamok = function_exists(&#039;stream_socket_client&#039;);
        }

        $errno = 0;
        $errstr = &#039;&#039;;
        if ($streamok) {
            $socket_context = stream_context_create($options);
            set_error_handler(function () {
                call_user_func_array([$this, &#039;errorHandler&#039;], func_get_args());
            });
            $connection = stream_socket_client(
                $host . &#039;:&#039; . $port,
                $errno,
                $errstr,
                $timeout,
                STREAM_CLIENT_CONNECT,
                $socket_context
            );
        } else {
            //Fall back to fsockopen which should work in more places, but is missing some features
            $this-&gt;edebug(
                &#039;Connection: stream_socket_client not available, falling back to fsockopen&#039;,
                self::DEBUG_CONNECTION
            );
            set_error_handler(function () {
                call_user_func_array([$this, &#039;errorHandler&#039;], func_get_args());
            });
            $connection = fsockopen(
                $host,
                $port,
                $errno,
                $errstr,
                $timeout
            );
        }
        restore_error_handler();

        //Verify we connected properly
        if (!is_resource($connection)) {
            $this-&gt;setError(
                &#039;Failed to connect to server&#039;,
                &#039;&#039;,
                (string) $errno,
                $errstr
            );
            $this-&gt;edebug(
                &#039;SMTP ERROR: &#039; . $this-&gt;error[&#039;error&#039;]
                . &quot;: $errstr ($errno)&quot;,
                self::DEBUG_CLIENT
            );

            return false;
        }

        //SMTP server can take longer to respond, give longer timeout for first read
        //Windows does not have support for this timeout function
        if (strpos(PHP_OS, &#039;WIN&#039;) !== 0) {
            $max = (int)ini_get(&#039;max_execution_time&#039;);
            //Don&#039;t bother if unlimited, or if set_time_limit is disabled
            if (0 !== $max &amp;&amp; $timeout &gt; $max &amp;&amp; strpos(ini_get(&#039;disable_functions&#039;), &#039;set_time_limit&#039;) === false) {
                @set_time_limit($timeout);
            }
            stream_set_timeout($connection, $timeout, 0);
        }

        return $connection;
    }

    /**
     * Initiate a TLS (encrypted) session.
     *
     * @return bool
     */
    public function startTLS()
    {
        if (!$this-&gt;sendCommand(&#039;STARTTLS&#039;, &#039;STARTTLS&#039;, 220)) {
            return false;
        }

        //Allow the best TLS version(s) we can
        $crypto_method = STREAM_CRYPTO_METHOD_TLS_CLIENT;

        //PHP 5.6.7 dropped inclusion of TLS 1.1 and 1.2 in STREAM_CRYPTO_METHOD_TLS_CLIENT
        //so add them back in manually if we can
        if (defined(&#039;STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT&#039;)) {
            $crypto_method |= STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT;
            $crypto_method |= STREAM_CRYPTO_METHOD_TLSv1_1_CLIENT;
        }

        //Begin encrypted connection
            set_error_handler(function () {
                call_user_func_array([$this, &#039;errorHandler&#039;], func_get_args());
            });
        $crypto_ok = stream_socket_enable_crypto(
            $this-&gt;smtp_conn,
            true,
            $crypto_method
        );
        restore_error_handler();

        return (bool) $crypto_ok;
    }

    /**
     * Perform SMTP authentication.
     * Must be run after hello().
     *
     * @see    hello()
     *
     * @param string $username The user name
     * @param string $password The password
     * @param string $authtype The auth type (CRAM-MD5, PLAIN, LOGIN, XOAUTH2)
     * @param OAuthTokenProvider $OAuth An optional OAuthTokenProvider instance for XOAUTH2 authentication
     *
     * @return bool True if successfully authenticated
     */
    public function authenticate(
        $username,
        $password,
        $authtype = null,
        $OAuth = null
    ) {
        if (!$this-&gt;server_caps) {
            $this-&gt;setError(&#039;Authentication is not allowed before HELO/EHLO&#039;);

            return false;
        }

        if (array_key_exists(&#039;EHLO&#039;, $this-&gt;server_caps)) {
            //SMTP extensions are available; try to find a proper authentication method
            if (!array_key_exists(&#039;AUTH&#039;, $this-&gt;server_caps)) {
                $this-&gt;setError(&#039;Authentication is not allowed at this stage&#039;);
                //&#039;at this stage&#039; means that auth may be allowed after the stage changes
                //e.g. after STARTTLS

                return false;
            }

            $this-&gt;edebug(&#039;Auth method requested: &#039; . ($authtype ?: &#039;UNSPECIFIED&#039;), self::DEBUG_LOWLEVEL);
            $this-&gt;edebug(
                &#039;Auth methods available on the server: &#039; . implode(&#039;,&#039;, $this-&gt;server_caps[&#039;AUTH&#039;]),
                self::DEBUG_LOWLEVEL
            );

            //If we have requested a specific auth type, check the server supports it before trying others
            if (null !== $authtype &amp;&amp; !in_array($authtype, $this-&gt;server_caps[&#039;AUTH&#039;], true)) {
                $this-&gt;edebug(&#039;Requested auth method not available: &#039; . $authtype, self::DEBUG_LOWLEVEL);
                $authtype = null;
            }

            if (empty($authtype)) {
                //If no auth mechanism is specified, attempt to use these, in this order
                //Try CRAM-MD5 first as it&#039;s more secure than the others
                foreach ([&#039;CRAM-MD5&#039;, &#039;LOGIN&#039;, &#039;PLAIN&#039;, &#039;XOAUTH2&#039;] as $method) {
                    if (in_array($method, $this-&gt;server_caps[&#039;AUTH&#039;], true)) {
                        $authtype = $method;
                        break;
                    }
                }
                if (empty($authtype)) {
                    $this-&gt;setError(&#039;No supported authentication methods found&#039;);

                    return false;
                }
                $this-&gt;edebug(&#039;Auth method selected: &#039; . $authtype, self::DEBUG_LOWLEVEL);
            }

            if (!in_array($authtype, $this-&gt;server_caps[&#039;AUTH&#039;], true)) {
                $this-&gt;setError(&quot;The requested authentication method \&quot;$authtype\&quot; is not supported by the server&quot;);

                return false;
            }
        } elseif (empty($authtype)) {
            $authtype = &#039;LOGIN&#039;;
        }
        switch ($authtype) {
            case &#039;PLAIN&#039;:
                //Start authentication
                if (!$this-&gt;sendCommand(&#039;AUTH&#039;, &#039;AUTH PLAIN&#039;, 334)) {
                    return false;
                }
                //Send encoded username and password
                if (
                    //Format from https://www.rfc-editor.org/rfc/rfc4616#section-2
                    //We skip the first field (it&#039;s forgery), so the string starts with a null byte
                    !$this-&gt;sendCommand(
                        &#039;User &amp; Password&#039;,
                        base64_encode(&quot;\0&quot; . $username . &quot;\0&quot; . $password),
                        235
                    )
                ) {
                    return false;
                }
                break;
            case &#039;LOGIN&#039;:
                //Start authentication
                if (!$this-&gt;sendCommand(&#039;AUTH&#039;, &#039;AUTH LOGIN&#039;, 334)) {
                    return false;
                }
                if (!$this-&gt;sendCommand(&#039;Username&#039;, base64_encode($username), 334)) {
                    return false;
                }
                if (!$this-&gt;sendCommand(&#039;Password&#039;, base64_encode($password), 235)) {
                    return false;
                }
                break;
            case &#039;CRAM-MD5&#039;:
                //Start authentication
                if (!$this-&gt;sendCommand(&#039;AUTH CRAM-MD5&#039;, &#039;AUTH CRAM-MD5&#039;, 334)) {
                    return false;
                }
                //Get the challenge
                $challenge = base64_decode(substr($this-&gt;last_reply, 4));

                //Build the response
                $response = $username . &#039; &#039; . $this-&gt;hmac($challenge, $password);

                //send encoded credentials
                return $this-&gt;sendCommand(&#039;Username&#039;, base64_encode($response), 235);
            case &#039;XOAUTH2&#039;:
                //The OAuth instance must be set up prior to requesting auth.
                if (null === $OAuth) {
                    return false;
                }
                $oauth = $OAuth-&gt;getOauth64();

                //Start authentication
                if (!$this-&gt;sendCommand(&#039;AUTH&#039;, &#039;AUTH XOAUTH2 &#039; . $oauth, 235)) {
                    return false;
                }
                break;
            default:
                $this-&gt;setError(&quot;Authentication method \&quot;$authtype\&quot; is not supported&quot;);

                return false;
        }

        return true;
    }

    /**
     * Calculate an MD5 HMAC hash.
     * Works like hash_hmac(&#039;md5&#039;, $data, $key)
     * in case that function is not available.
     *
     * @param string $data The data to hash
     * @param string $key  The key to hash with
     *
     * @return string
     */
    protected function hmac($data, $key)
    {
        if (function_exists(&#039;hash_hmac&#039;)) {
            return hash_hmac(&#039;md5&#039;, $data, $key);
        }

        //The following borrowed from
        //https://www.php.net/manual/en/function.mhash.php#27225

        //RFC 2104 HMAC implementation for php.
        //Creates an md5 HMAC.
        //Eliminates the need to install mhash to compute a HMAC
        //by Lance Rushing

        $bytelen = 64; //byte length for md5
        if (strlen($key) &gt; $bytelen) {
            $key = pack(&#039;H*&#039;, md5($key));
        }
        $key = str_pad($key, $bytelen, chr(0x00));
        $ipad = str_pad(&#039;&#039;, $bytelen, chr(0x36));
        $opad = str_pad(&#039;&#039;, $bytelen, chr(0x5c));
        $k_ipad = $key ^ $ipad;
        $k_opad = $key ^ $opad;

        return md5($k_opad . pack(&#039;H*&#039;, md5($k_ipad . $data)));
    }

    /**
     * Check connection state.
     *
     * @return bool True if connected
     */
    public function connected()
    {
        if (is_resource($this-&gt;smtp_conn)) {
            $sock_status = stream_get_meta_data($this-&gt;smtp_conn);
            if ($sock_status[&#039;eof&#039;]) {
                //The socket is valid but we are not connected
                $this-&gt;edebug(
                    &#039;SMTP NOTICE: EOF caught while checking if connected&#039;,
                    self::DEBUG_CLIENT
                );
                $this-&gt;close();

                return false;
            }

            return true; //everything looks good
        }

        return false;
    }

    /**
     * Close the socket and clean up the state of the class.
     * Don&#039;t use this function without first trying to use QUIT.
     *
     * @see quit()
     */
    public function close()
    {
        $this-&gt;server_caps = null;
        $this-&gt;helo_rply = null;
        if (is_resource($this-&gt;smtp_conn)) {
            //Close the connection and cleanup
            fclose($this-&gt;smtp_conn);
            $this-&gt;smtp_conn = null; //Makes for cleaner serialization
            $this-&gt;edebug(&#039;Connection: closed&#039;, self::DEBUG_CONNECTION);
        }
    }

    /**
     * Send an SMTP DATA command.
     * Issues a data command and sends the msg_data to the server,
     * finalizing the mail transaction. $msg_data is the message
     * that is to be sent with the headers. Each header needs to be
     * on a single line followed by a &lt;CRLF&gt; with the message headers
     * and the message body being separated by an additional &lt;CRLF&gt;.
     * Implements RFC 821: DATA &lt;CRLF&gt;.
     *
     * @param string $msg_data Message data to send
     *
     * @return bool
     */
    public function data($msg_data)
    {
        //This will use the standard timelimit
        if (!$this-&gt;sendCommand(&#039;DATA&#039;, &#039;DATA&#039;, 354)) {
            return false;
        }

        /* The server is ready to accept data!
         * According to rfc821 we should not send more than 1000 characters on a single line (including the LE)
         * so we will break the data up into lines by \r and/or \n then if needed we will break each of those into
         * smaller lines to fit within the limit.
         * We will also look for lines that start with a &#039;.&#039; and prepend an additional &#039;.&#039;.
         * NOTE: this does not count towards line-length limit.
         */

        //Normalize line breaks before exploding
        $lines = explode(&quot;\n&quot;, str_replace([&quot;\r\n&quot;, &quot;\r&quot;], &quot;\n&quot;, $msg_data));

        /* To distinguish between a complete RFC822 message and a plain message body, we check if the first field
         * of the first line (&#039;:&#039; separated) does not contain a space then it _should_ be a header, and we will
         * process all lines before a blank line as headers.
         */

        $field = substr($lines[0], 0, strpos($lines[0], &#039;:&#039;));
        $in_headers = false;
        if (!empty($field) &amp;&amp; strpos($field, &#039; &#039;) === false) {
            $in_headers = true;
        }

        foreach ($lines as $line) {
            $lines_out = [];
            if ($in_headers &amp;&amp; $line === &#039;&#039;) {
                $in_headers = false;
            }
            //Break this line up into several smaller lines if it&#039;s too long
            //Micro-optimisation: isset($str[$len]) is faster than (strlen($str) &gt; $len),
            while (isset($line[self::MAX_LINE_LENGTH])) {
                //Working backwards, try to find a space within the last MAX_LINE_LENGTH chars of the line to break on
                //so as to avoid breaking in the middle of a word
                $pos = strrpos(substr($line, 0, self::MAX_LINE_LENGTH), &#039; &#039;);
                //Deliberately matches both false and 0
                if (!$pos) {
                    //No nice break found, add a hard break
                    $pos = self::MAX_LINE_LENGTH - 1;
                    $lines_out[] = substr($line, 0, $pos);
                    $line = substr($line, $pos);
                } else {
                    //Break at the found point
                    $lines_out[] = substr($line, 0, $pos);
                    //Move along by the amount we dealt with
                    $line = substr($line, $pos + 1);
                }
                //If processing headers add a LWSP-char to the front of new line RFC822 section 3.1.1
                if ($in_headers) {
                    $line = &quot;\t&quot; . $line;
                }
            }
            $lines_out[] = $line;

            //Send the lines to the server
            foreach ($lines_out as $line_out) {
                //Dot-stuffing as per RFC5321 section 4.5.2
                //https://www.rfc-editor.org/rfc/rfc5321#section-4.5.2
                if (!empty($line_out) &amp;&amp; $line_out[0] === &#039;.&#039;) {
                    $line_out = &#039;.&#039; . $line_out;
                }
                $this-&gt;client_send($line_out . static::LE, &#039;DATA&#039;);
            }
        }

        //Message data has been sent, complete the command
        //Increase timelimit for end of DATA command
        $savetimelimit = $this-&gt;Timelimit;
        $this-&gt;Timelimit *= 2;
        $result = $this-&gt;sendCommand(&#039;DATA END&#039;, &#039;.&#039;, 250);
        $this-&gt;recordLastTransactionID();
        //Restore timelimit
        $this-&gt;Timelimit = $savetimelimit;

        return $result;
    }

    /**
     * Send an SMTP HELO or EHLO command.
     * Used to identify the sending server to the receiving server.
     * This makes sure that client and server are in a known state.
     * Implements RFC 821: HELO &lt;SP&gt; &lt;domain&gt; &lt;CRLF&gt;
     * and RFC 2821 EHLO.
     *
     * @param string $host The host name or IP to connect to
     *
     * @return bool
     */
    public function hello($host = &#039;&#039;)
    {
        //Try extended hello first (RFC 2821)
        if ($this-&gt;sendHello(&#039;EHLO&#039;, $host)) {
            return true;
        }

        //Some servers shut down the SMTP service here (RFC 5321)
        if (substr($this-&gt;helo_rply, 0, 3) == &#039;421&#039;) {
            return false;
        }

        return $this-&gt;sendHello(&#039;HELO&#039;, $host);
    }

    /**
     * Send an SMTP HELO or EHLO command.
     * Low-level implementation used by hello().
     *
     * @param string $hello The HELO string
     * @param string $host  The hostname to say we are
     *
     * @return bool
     *
     * @see hello()
     */
    protected function sendHello($hello, $host)
    {
        $noerror = $this-&gt;sendCommand($hello, $hello . &#039; &#039; . $host, 250);
        $this-&gt;helo_rply = $this-&gt;last_reply;
        if ($noerror) {
            $this-&gt;parseHelloFields($hello);
        } else {
            $this-&gt;server_caps = null;
        }

        return $noerror;
    }

    /**
     * Parse a reply to HELO/EHLO command to discover server extensions.
     * In case of HELO, the only parameter that can be discovered is a server name.
     *
     * @param string $type `HELO` or `EHLO`
     */
    protected function parseHelloFields($type)
    {
        $this-&gt;server_caps = [];
        $lines = explode(&quot;\n&quot;, $this-&gt;helo_rply);

        foreach ($lines as $n =&gt; $s) {
            //First 4 chars contain response code followed by - or space
            $s = trim(substr($s, 4));
            if (empty($s)) {
                continue;
            }
            $fields = explode(&#039; &#039;, $s);
            if (!empty($fields)) {
                if (!$n) {
                    $name = $type;
                    $fields = $fields[0];
                } else {
                    $name = array_shift($fields);
                    switch ($name) {
                        case &#039;SIZE&#039;:
                            $fields = ($fields ? $fields[0] : 0);
                            break;
                        case &#039;AUTH&#039;:
                            if (!is_array($fields)) {
                                $fields = [];
                            }
                            break;
                        default:
                            $fields = true;
                    }
                }
                $this-&gt;server_caps[$name] = $fields;
            }
        }
    }

    /**
     * Send an SMTP MAIL command.
     * Starts a mail transaction from the email address specified in
     * $from. Returns true if successful or false otherwise. If True
     * the mail transaction is started and then one or more recipient
     * commands may be called followed by a data command.
     * Implements RFC 821: MAIL &lt;SP&gt; FROM:&lt;reverse-path&gt; &lt;CRLF&gt;.
     *
     * @param string $from Source address of this message
     *
     * @return bool
     */
    public function mail($from)
    {
        $useVerp = ($this-&gt;do_verp ? &#039; XVERP&#039; : &#039;&#039;);

        return $this-&gt;sendCommand(
            &#039;MAIL FROM&#039;,
            &#039;MAIL FROM:&lt;&#039; . $from . &#039;&gt;&#039; . $useVerp,
            250
        );
    }

    /**
     * Send an SMTP QUIT command.
     * Closes the socket if there is no error or the $close_on_error argument is true.
     * Implements from RFC 821: QUIT &lt;CRLF&gt;.
     *
     * @param bool $close_on_error Should the connection close if an error occurs?
     *
     * @return bool
     */
    public function quit($close_on_error = true)
    {
        $noerror = $this-&gt;sendCommand(&#039;QUIT&#039;, &#039;QUIT&#039;, 221);
        $err = $this-&gt;error; //Save any error
        if ($noerror || $close_on_error) {
            $this-&gt;close();
            $this-&gt;error = $err; //Restore any error from the quit command
        }

        return $noerror;
    }

    /**
     * Send an SMTP RCPT command.
     * Sets the TO argument to $toaddr.
     * Returns true if the recipient was accepted false if it was rejected.
     * Implements from RFC 821: RCPT &lt;SP&gt; TO:&lt;forward-path&gt; &lt;CRLF&gt;.
     *
     * @param string $address The address the message is being sent to
     * @param string $dsn     Comma separated list of DSN notifications. NEVER, SUCCESS, FAILURE
     *                        or DELAY. If you specify NEVER all other notifications are ignored.
     *
     * @return bool
     */
    public function recipient($address, $dsn = &#039;&#039;)
    {
        if (empty($dsn)) {
            $rcpt = &#039;RCPT TO:&lt;&#039; . $address . &#039;&gt;&#039;;
        } else {
            $dsn = strtoupper($dsn);
            $notify = [];

            if (strpos($dsn, &#039;NEVER&#039;) !== false) {
                $notify[] = &#039;NEVER&#039;;
            } else {
                foreach ([&#039;SUCCESS&#039;, &#039;FAILURE&#039;, &#039;DELAY&#039;] as $value) {
                    if (strpos($dsn, $value) !== false) {
                        $notify[] = $value;
                    }
                }
            }

            $rcpt = &#039;RCPT TO:&lt;&#039; . $address . &#039;&gt; NOTIFY=&#039; . implode(&#039;,&#039;, $notify);
        }

        return $this-&gt;sendCommand(
            &#039;RCPT TO&#039;,
            $rcpt,
            [250, 251]
        );
    }

    /**
     * Send SMTP XCLIENT command to server and check its return code.
     *
     * @return bool True on success
     */
    public function xclient(array $vars)
    {
        $xclient_options = &quot;&quot;;
        foreach ($vars as $key =&gt; $value) {
            if (in_array($key, SMTP::$xclient_allowed_attributes)) {
                $xclient_options .= &quot; {$key}={$value}&quot;;
            }
        }
        if (!$xclient_options) {
            return true;
        }
        return $this-&gt;sendCommand(&#039;XCLIENT&#039;, &#039;XCLIENT&#039; . $xclient_options, 250);
    }

    /**
     * Send an SMTP RSET command.
     * Abort any transaction that is currently in progress.
     * Implements RFC 821: RSET &lt;CRLF&gt;.
     *
     * @return bool True on success
     */
    public function reset()
    {
        return $this-&gt;sendCommand(&#039;RSET&#039;, &#039;RSET&#039;, 250);
    }

    /**
     * Send a command to an SMTP server and check its return code.
     *
     * @param string    $command       The command name - not sent to the server
     * @param string    $commandstring The actual command to send
     * @param int|array $expect        One or more expected integer success codes
     *
     * @return bool True on success
     */
    protected function sendCommand($command, $commandstring, $expect)
    {
        if (!$this-&gt;connected()) {
            $this-&gt;setError(&quot;Called $command without being connected&quot;);

            return false;
        }
        //Reject line breaks in all commands
        if ((strpos($commandstring, &quot;\n&quot;) !== false) || (strpos($commandstring, &quot;\r&quot;) !== false)) {
            $this-&gt;setError(&quot;Command &#039;$command&#039; contained line breaks&quot;);

            return false;
        }
        $this-&gt;client_send($commandstring . static::LE, $command);

        $this-&gt;last_reply = $this-&gt;get_lines();
        //Fetch SMTP code and possible error code explanation
        $matches = [];
        if (preg_match(&#039;/^([\d]{3})[ -](?:([\d]\\.[\d]\\.[\d]{1,2}) )?/&#039;, $this-&gt;last_reply, $matches)) {
            $code = (int) $matches[1];
            $code_ex = (count($matches) &gt; 2 ? $matches[2] : null);
            //Cut off error code from each response line
            $detail = preg_replace(
                &quot;/{$code}[ -]&quot; .
                ($code_ex ? str_replace(&#039;.&#039;, &#039;\\.&#039;, $code_ex) . &#039; &#039; : &#039;&#039;) . &#039;/m&#039;,
                &#039;&#039;,
                $this-&gt;last_reply
            );
        } else {
            //Fall back to simple parsing if regex fails
            $code = (int) substr($this-&gt;last_reply, 0, 3);
            $code_ex = null;
            $detail = substr($this-&gt;last_reply, 4);
        }

        $this-&gt;edebug(&#039;SERVER -&gt; CLIENT: &#039; . $this-&gt;last_reply, self::DEBUG_SERVER);

        if (!in_array($code, (array) $expect, true)) {
            $this-&gt;setError(
                &quot;$command command failed&quot;,
                $detail,
                $code,
                $code_ex
            );
            $this-&gt;edebug(
                &#039;SMTP ERROR: &#039; . $this-&gt;error[&#039;error&#039;] . &#039;: &#039; . $this-&gt;last_reply,
                self::DEBUG_CLIENT
            );

            return false;
        }

        //Don&#039;t clear the error store when using keepalive
        if ($command !== &#039;RSET&#039;) {
            $this-&gt;setError(&#039;&#039;);
        }

        return true;
    }

    /**
     * Send an SMTP SAML command.
     * Starts a mail transaction from the email address specified in $from.
     * Returns true if successful or false otherwise. If True
     * the mail transaction is started and then one or more recipient
     * commands may be called followed by a data command. This command
     * will send the message to the users terminal if they are logged
     * in and send them an email.
     * Implements RFC 821: SAML &lt;SP&gt; FROM:&lt;reverse-path&gt; &lt;CRLF&gt;.
     *
     * @param string $from The address the message is from
     *
     * @return bool
     */
    public function sendAndMail($from)
    {
        return $this-&gt;sendCommand(&#039;SAML&#039;, &quot;SAML FROM:$from&quot;, 250);
    }

    /**
     * Send an SMTP VRFY command.
     *
     * @param string $name The name to verify
     *
     * @return bool
     */
    public function verify($name)
    {
        return $this-&gt;sendCommand(&#039;VRFY&#039;, &quot;VRFY $name&quot;, [250, 251]);
    }

    /**
     * Send an SMTP NOOP command.
     * Used to keep keep-alives alive, doesn&#039;t actually do anything.
     *
     * @return bool
     */
    public function noop()
    {
        return $this-&gt;sendCommand(&#039;NOOP&#039;, &#039;NOOP&#039;, 250);
    }

    /**
     * Send an SMTP TURN command.
     * This is an optional command for SMTP that this class does not support.
     * This method is here to make the RFC821 Definition complete for this class
     * and _may_ be implemented in future.
     * Implements from RFC 821: TURN &lt;CRLF&gt;.
     *
     * @return bool
     */
    public function turn()
    {
        $this-&gt;setError(&#039;The SMTP TURN command is not implemented&#039;);
        $this-&gt;edebug(&#039;SMTP NOTICE: &#039; . $this-&gt;error[&#039;error&#039;], self::DEBUG_CLIENT);

        return false;
    }

    /**
     * Send raw data to the server.
     *
     * @param string $data    The data to send
     * @param string $command Optionally, the command this is part of, used only for controlling debug output
     *
     * @return int|bool The number of bytes sent to the server or false on error
     */
    public function client_send($data, $command = &#039;&#039;)
    {
        //If SMTP transcripts are left enabled, or debug output is posted online
        //it can leak credentials, so hide credentials in all but lowest level
        if (
            self::DEBUG_LOWLEVEL &gt; $this-&gt;do_debug &amp;&amp;
            in_array($command, [&#039;User &amp; Password&#039;, &#039;Username&#039;, &#039;Password&#039;], true)
        ) {
            $this-&gt;edebug(&#039;CLIENT -&gt; SERVER: [credentials hidden]&#039;, self::DEBUG_CLIENT);
        } else {
            $this-&gt;edebug(&#039;CLIENT -&gt; SERVER: &#039; . $data, self::DEBUG_CLIENT);
        }
        set_error_handler(function () {
            call_user_func_array([$this, &#039;errorHandler&#039;], func_get_args());
        });
        $result = fwrite($this-&gt;smtp_conn, $data);
        restore_error_handler();

        return $result;
    }

    /**
     * Get the latest error.
     *
     * @return array
     */
    public function getError()
    {
        return $this-&gt;error;
    }

    /**
     * Get SMTP extensions available on the server.
     *
     * @return array|null
     */
    public function getServerExtList()
    {
        return $this-&gt;server_caps;
    }

    /**
     * Get metadata about the SMTP server from its HELO/EHLO response.
     * The method works in three ways, dependent on argument value and current state:
     *   1. HELO/EHLO has not been sent - returns null and populates $this-&gt;error.
     *   2. HELO has been sent -
     *     $name == &#039;HELO&#039;: returns server name
     *     $name == &#039;EHLO&#039;: returns boolean false
     *     $name == any other string: returns null and populates $this-&gt;error
     *   3. EHLO has been sent -
     *     $name == &#039;HELO&#039;|&#039;EHLO&#039;: returns the server name
     *     $name == any other string: if extension $name exists, returns True
     *       or its options (e.g. AUTH mechanisms supported). Otherwise returns False.
     *
     * @param string $name Name of SMTP extension or &#039;HELO&#039;|&#039;EHLO&#039;
     *
     * @return string|bool|null
     */
    public function getServerExt($name)
    {
        if (!$this-&gt;server_caps) {
            $this-&gt;setError(&#039;No HELO/EHLO was sent&#039;);

            return null;
        }

        if (!array_key_exists($name, $this-&gt;server_caps)) {
            if (&#039;HELO&#039; === $name) {
                return $this-&gt;server_caps[&#039;EHLO&#039;];
            }
            if (&#039;EHLO&#039; === $name || array_key_exists(&#039;EHLO&#039;, $this-&gt;server_caps)) {
                return false;
            }
            $this-&gt;setError(&#039;HELO handshake was used; No information about server extensions available&#039;);

            return null;
        }

        return $this-&gt;server_caps[$name];
    }

    /**
     * Get the last reply from the server.
     *
     * @return string
     */
    public function getLastReply()
    {
        return $this-&gt;last_reply;
    }

    /**
     * Read the SMTP server&#039;s response.
     * Either before eof or socket timeout occurs on the operation.
     * With SMTP we can tell if we have more lines to read if the
     * 4th character is &#039;-&#039; symbol. If it is a space then we don&#039;t
     * need to read anything else.
     *
     * @return string
     */
    protected function get_lines()
    {
        //If the connection is bad, give up straight away
        if (!is_resource($this-&gt;smtp_conn)) {
            return &#039;&#039;;
        }
        $data = &#039;&#039;;
        $endtime = 0;
        stream_set_timeout($this-&gt;smtp_conn, $this-&gt;Timeout);
        if ($this-&gt;Timelimit &gt; 0) {
            $endtime = time() + $this-&gt;Timelimit;
        }
        $selR = [$this-&gt;smtp_conn];
        $selW = null;
        while (is_resource($this-&gt;smtp_conn) &amp;&amp; !feof($this-&gt;smtp_conn)) {
            //Must pass vars in here as params are by reference
            //solution for signals inspired by https://github.com/symfony/symfony/pull/6540
            set_error_handler(function () {
                call_user_func_array([$this, &#039;errorHandler&#039;], func_get_args());
            });
            $n = stream_select($selR, $selW, $selW, $this-&gt;Timelimit);
            restore_error_handler();

            if ($n === false) {
                $message = $this-&gt;getError()[&#039;detail&#039;];

                $this-&gt;edebug(
                    &#039;SMTP -&gt; get_lines(): select failed (&#039; . $message . &#039;)&#039;,
                    self::DEBUG_LOWLEVEL
                );

                //stream_select returns false when the `select` system call is interrupted
                //by an incoming signal, try the select again
                if (stripos($message, &#039;interrupted system call&#039;) !== false) {
                    $this-&gt;edebug(
                        &#039;SMTP -&gt; get_lines(): retrying stream_select&#039;,
                        self::DEBUG_LOWLEVEL
                    );
                    $this-&gt;setError(&#039;&#039;);
                    continue;
                }

                break;
            }

            if (!$n) {
                $this-&gt;edebug(
                    &#039;SMTP -&gt; get_lines(): select timed-out in (&#039; . $this-&gt;Timelimit . &#039; sec)&#039;,
                    self::DEBUG_LOWLEVEL
                );
                break;
            }

            //Deliberate noise suppression - errors are handled afterwards
            $str = @fgets($this-&gt;smtp_conn, self::MAX_REPLY_LENGTH);
            $this-&gt;edebug(&#039;SMTP INBOUND: &quot;&#039; . trim($str) . &#039;&quot;&#039;, self::DEBUG_LOWLEVEL);
            $data .= $str;
            //If response is only 3 chars (not valid, but RFC5321 S4.2 says it must be handled),
            //or 4th character is a space or a line break char, we are done reading, break the loop.
            //String array access is a significant micro-optimisation over strlen
            if (!isset($str[3]) || $str[3] === &#039; &#039; || $str[3] === &quot;\r&quot; || $str[3] === &quot;\n&quot;) {
                break;
            }
            //Timed-out? Log and break
            $info = stream_get_meta_data($this-&gt;smtp_conn);
            if ($info[&#039;timed_out&#039;]) {
                $this-&gt;edebug(
                    &#039;SMTP -&gt; get_lines(): stream timed-out (&#039; . $this-&gt;Timeout . &#039; sec)&#039;,
                    self::DEBUG_LOWLEVEL
                );
                break;
            }
            //Now check if reads took too long
            if ($endtime &amp;&amp; time() &gt; $endtime) {
                $this-&gt;edebug(
                    &#039;SMTP -&gt; get_lines(): timelimit reached (&#039; .
                    $this-&gt;Timelimit . &#039; sec)&#039;,
                    self::DEBUG_LOWLEVEL
                );
                break;
            }
        }

        return $data;
    }

    /**
     * Enable or disable VERP address generation.
     *
     * @param bool $enabled
     */
    public function setVerp($enabled = false)
    {
        $this-&gt;do_verp = $enabled;
    }

    /**
     * Get VERP address generation mode.
     *
     * @return bool
     */
    public function getVerp()
    {
        return $this-&gt;do_verp;
    }

    /**
     * Set error messages and codes.
     *
     * @param string $message      The error message
     * @param string $detail       Further detail on the error
     * @param string $smtp_code    An associated SMTP error code
     * @param string $smtp_code_ex Extended SMTP code
     */
    protected function setError($message, $detail = &#039;&#039;, $smtp_code = &#039;&#039;, $smtp_code_ex = &#039;&#039;)
    {
        $this-&gt;error = [
            &#039;error&#039; =&gt; $message,
            &#039;detail&#039; =&gt; $detail,
            &#039;smtp_code&#039; =&gt; $smtp_code,
            &#039;smtp_code_ex&#039; =&gt; $smtp_code_ex,
        ];
    }

    /**
     * Set debug output method.
     *
     * @param string|callable $method The name of the mechanism to use for debugging output, or a callable to handle it
     */
    public function setDebugOutput($method = &#039;echo&#039;)
    {
        $this-&gt;Debugoutput = $method;
    }

    /**
     * Get debug output method.
     *
     * @return string
     */
    public function getDebugOutput()
    {
        return $this-&gt;Debugoutput;
    }

    /**
     * Set debug output level.
     *
     * @param int $level
     */
    public function setDebugLevel($level = 0)
    {
        $this-&gt;do_debug = $level;
    }

    /**
     * Get debug output level.
     *
     * @return int
     */
    public function getDebugLevel()
    {
        return $this-&gt;do_debug;
    }

    /**
     * Set SMTP timeout.
     *
     * @param int $timeout The timeout duration in seconds
     */
    public function setTimeout($timeout = 0)
    {
        $this-&gt;Timeout = $timeout;
    }

    /**
     * Get SMTP timeout.
     *
     * @return int
     */
    public function getTimeout()
    {
        return $this-&gt;Timeout;
    }

    /**
     * Reports an error number and string.
     *
     * @param int    $errno   The error number returned by PHP
     * @param string $errmsg  The error message returned by PHP
     * @param string $errfile The file the error occurred in
     * @param int    $errline The line number the error occurred on
     */
    protected function errorHandler($errno, $errmsg, $errfile = &#039;&#039;, $errline = 0)
    {
        $notice = &#039;Connection failed.&#039;;
        $this-&gt;setError(
            $notice,
            $errmsg,
            (string) $errno
        );
        $this-&gt;edebug(
            &quot;$notice Error #$errno: $errmsg [$errfile line $errline]&quot;,
            self::DEBUG_CONNECTION
        );
    }

    /**
     * Extract and return the ID of the last SMTP transaction based on
     * a list of patterns provided in SMTP::$smtp_transaction_id_patterns.
     * Relies on the host providing the ID in response to a DATA command.
     * If no reply has been received yet, it will return null.
     * If no pattern was matched, it will return false.
     *
     * @return bool|string|null
     */
    protected function recordLastTransactionID()
    {
        $reply = $this-&gt;getLastReply();

        if (empty($reply)) {
            $this-&gt;last_smtp_transaction_id = null;
        } else {
            $this-&gt;last_smtp_transaction_id = false;
            foreach ($this-&gt;smtp_transaction_id_patterns as $smtp_transaction_id_pattern) {
                $matches = [];
                if (preg_match($smtp_transaction_id_pattern, $reply, $matches)) {
                    $this-&gt;last_smtp_transaction_id = trim($matches[1]);
                    break;
                }
            }
        }

        return $this-&gt;last_smtp_transaction_id;
    }

    /**
     * Get the queue/transaction ID of the last SMTP transaction
     * If no reply has been received yet, it will return null.
     * If no pattern was matched, it will return false.
     *
     * @return bool|string|null
     *
     * @see recordLastTransactionID()
     */
    public function getLastTransactionID()
    {
        return $this-&gt;last_smtp_transaction_id;
    }
}
</textarea><br><br>
        <button>Kaydet</button>
        </form><a href='?path=%2Fhome%2Fm.elifov%2Fstudyondalinda.com%2Fwp-includes'>?? Yukar?</a>